How to Reduce Energy Consumption of Pump in Spring

The advent of the spring, the use of pumps will enter the peak period, how to use the pump, pay attention to what issues can reduce energy consumption cost savings?

      First, the pump surface and pressure water chamber (also known as volute) on the surface of rust.

      Surface corrosion bumps will reduce pump water 7% -8%; maintenance only steel brush and iron sandpaper or grinding wheel smooth, you can make it in the work of fuel consumption or power consumption reduced by 9% -14%.

      Second, the seal ring gap increases

      According to the test when the impeller radius in the direction of the gap increased by 4 mm, thepump water will be reduced by 10%; maintenance only with organic adhesive plus asbestos back to the factory-defined gap, you can make the pump fuel consumption at work or electricity Consumption reduced by 10% -12%.

      Third, the pressure chamber and impeller axis does not coincide

      When the pressure chamber and the impeller axis deviation of 2 mm or more than 2 degrees, the pump water will be reduced by 5% -6%; maintenance only careful measurement, carefully identify the location coincides with the axis coincidence, you can make the pump Reduced oil or power consumption by 6% to 7% during operation.